#Lego digital designer rotate 45 degrees software
#Lego digital designer rotate 45 degrees code

The twin laser canons were comprised of three main components вЂ“ the barrel (the engine from the Mig kit), a slotted sleeve into which the barrel was inserted and rectilinear base assembled out of laser cut acrylic sheet. With the structural casework of the Tower finished it was time to turn my attention to the details. This was then capped with a narrow styrene strip to complete the assembly. On top of the styrene were glued short pieces of Plastruct ABS plastic Tee structural shapes, the same material that was used on the original model.

The curved tracks alongside the laser barrels were made by first cladding CNC cut pieces of MDF with styrene sheet. The assembled casework for the tower is of a really impressive size! Man this sucker is big! And the CNC routed panel lines are really clean and sharp. The parts were cut out of the MDF sheet material with a Вј inch diameter router bit and the panels lines routed into the surface with a 1/16 inch diameter bit.

#Lego digital designer rotate 45 degrees code

The G Code is then imported into a program called Mach 3 that actually sends the control signals to the stepper motors that drive the router. V Carve calculates and exports the вЂњG-CodeвЂќ which is a standard machine language used to control CNC machine. dxf files are imported into the program where the various cutting depths, speeds and bit sizes are determined.

#Lego digital designer rotate 45 degrees software

I use a software program called V Carve from Vectric. dxf files were loaded into the computer that controls the CNC router. ItвЂ™s used mostly for making paint grade cabinets and signage and paints beautifully, even the cut edges. This material is similar to the fiberboard found at most home center and lumber stores except that it has a smoother surface and a denser, more consistent core. The material from which IвЂ™ll cut the casework is a special premium MDF (Medium Density Fiberboard) Вј inch thick made by Plum Creek. IвЂ™ve designed the casework in such a way that I can put a mechanism into it a later time if desired.) IвЂ™m building a static, non-moving display model so an interior mechanism wonвЂ™t be needed. The original model also had a mechanical armature and motors inside it that would rotate the turret and move the barrels to simulate firing at the Rebel X-Wing fighters. While the some of the materials and construction methods used to build the original Death Star Laser Tower filming model are not known, it was most likely made of a core structure of either wood or Plexiglas covered with panels cut from styrene sheet. Today, he dives into the fabrication of the tower and laser cannons. In Part 1, David explained sourcing reference images and creating a 3D model. This month, prop maker David Goldberg shares with us his build of a studio-scale replica of the Death Star laser tower from Star Wars. Prop builder David Goldberg walks us through his replica process, and shares the files for his build!